Compliance

Industrial water taxes

Understanding and managing your wastewater tax bill reduces cost and avoids compliance penalties.

What we do

  • Tax calculation and declaration: TEUI (SPW) and CVAI (SPGE), annual declaration before 31 March, complete or simplified formula.
  • Pollutant load assessment: sampling frequency planning, parameters (suspended solids, COD, N, P, metals), coordination with an ISSeP-approved laboratory.
  • Tax reduction and optimisation: parameter-by-parameter cost breakdown, identification of reduction levers, simulation of the impact of pre-treatment.
  • Compliance monitoring: comparison of discharges with permit limits, sampling calendar management, year-on-year trend analysis.

Tax calculation and declaration

We calculate your industrial wastewater tax and prepare your annual declaration under both the SPW and SPGE regimes:

  • SPW regime (TEUI): applies to sites discharging to natural water bodies or to sewers not connected to a public treatment plant. The annual declaration is due by 31 March.
  • SPGE regime (CVAI): applies to sites connected to a public treatment plant through an industrial sanitation contract (Contrat d’Assainissement Industriel). Same declaration deadline.
  • Simplified formula: available on request where a full parametric declaration is technically or economically disproportionate, subject to approval by the administration.

Which regime applies to your site depends on where your wastewater goes, not on your sector or size. Both use the same pollutant load formula, but the legal framework, the receiving authority and the financial consequences are different.

Pollutant load assessment

We plan and coordinate the sampling campaigns your declaration requires, based on your actual pollutant load:

  • Sampling frequency determined by your prior-year load across five parameters: suspended solids, COD, total nitrogen, total phosphorus and heavy metals.
  • Coordination with an ISSeP-approved laboratory for sampling, transport and analysis, using methods validated under the Code de l’Eau.
  • Flow measurement requirements covered: continuous flow meter for sites above 100 m³/day, justified estimation method for smaller sites.

Getting the sampling frequency right matters both ways. Under-sampling risks a declaration rejected by the administration. Over-sampling adds cost without regulatory benefit.

Tax reduction and optimisation

We break down your tax bill parameter by parameter so that you know exactly what drives the cost:

  • Full breakdown of the tax by component: suspended solids, COD, nitrogen, phosphorus, metals, cooling water and ecotoxicity.
  • Simulation of the impact of pre-treatment or process changes on your tax bill before you invest.
  • CVAI cost split into operating cost (volume, COD, suspended solids, N, P) and investment cost, to identify which parameters offer the most reduction potential.

Most industrial sites have one or two parameters that account for the majority of their tax. Knowing which ones makes the case for treatment investment straightforward.

Compliance monitoring

We track your discharge quality against your permit limits alongside your tax declaration, so that both are managed together:

  • Side-by-side comparison of measured concentrations with permit thresholds at each discharge point.
  • Annual sampling calendar aligned with both declaration obligations and permit conditions, taking the higher frequency where they differ.
  • Year-on-year trend reporting to spot deteriorating parameters before they become a permit or declaration problem.

Your wastewater tax declaration and your environmental permit use the same underlying data. Managing them separately is a common source of inconsistency and rework.

Let’s review your wastewater tax situation

Whether your wastewater tax bill is climbing or a declaration deadline is approaching, understanding what drives the cost is the first step to reducing it.

Talk to an expert

Let's talk about your water.

Tell us about your site: we will tell you where your levers are.

Talk to our engineers